Huaqiu SMT
High and reliable one-stop PCBA intelligent manufacturer
Huaqiu Mall
Self-operated electronic components mall
PCB Layout
High multi-layer, high-density product design
Steel Network Manufacturing
Special focus on high-quality steel network manufacturing
BOM unit
One-stop procurement and processing plan for special research
Huaqiu DFM
One-key analysis of design hazards
Huaqiu certification
Certification detection is indisputable
1. Disassembly difficulty: ★★★★★, belonging to high-quality water standards. As an ultra-thin mobile phone, the high disassembly difficulty of vivo X5Pro is not unpredictable, but the difficulty is divided into 4 stars. In addition to the thin Malawians Escort, another important reason is that when the small parts on its external parts are always natural and unexpected expenses, even Malawians Escort are disassembly. Daddy didn’t even know where it came out, so he asked the disassembler to be more careful and to have more troubles.
2. Disassembly time: 35 minutes.
3. Disassembly steps and points to pay attention to: a. Use the card to pull out the Malawians SugardaddySIM card slot;
b. The air gun temperature is adjusted to 200 degrees, heat the bottom of the rear cover for an average of 1 minute, heat the two sides for half a minute, use a suction plate to suck a corner of the rear cover, and turn it open through the process of spudger. During the process, you should pay attention to the surrounding seals. Because they are in shape and are connected together, do not break or maybe form a group. Since the recovery will be supported later, they must be glued and attached;
c. Put the back plate fixing screw down, and their varieties and numbers are more than the ones, so don’t mess up;
d. When pulling the screw, you will encounter the first small matter in the process of disassemblying the machine. There is a small gray screw at the top of the back plate, which is mainly in the center. This small screw is different from other screws. The one that is mounted along the way is a very small metal component, not the screw position (nut) of the external frame. When the koala was disassembled for the first time, it didn’t know that it was the design as expected. When the screw was removed, the small metal piece was lost and almost lost. And because it happened suddenly, I didn’t know what the part was. Because it was really too small, the screw could not be lifted up by itself;
g. Break all the lines and radios connected to the motherboard;
h. Remove all the motherboard fixing screws;
i. Connect the motherboard, and you will encounter the second small fee in the disassembly process. After we found out that the motherboard still couldn’t get it, and we felt that the metal chip of the headphone interface department stuck the motherboard. In fact, it is true that this door seems simple, but actually contains two metal parts and a corresponding slot. The metal part that was originally pressed on the screw is particularly small. If the motherboard is lifted up successfully, it will cause the metal part to be lost. Fortunately, it will eventually be retrieved, but this small metal part will become the most expensive part of the installation machine;
j. Install the battery, just follow the operation of the battery back, it can be done easily;
k. Take off the front and rear camera heads;
l. Install the motherboard barrier cover.
4. Disassembly and touching: To be honest, when I first picked up the vivo X5Pro, I was attracted by its feel. I recall that its release will be called “handmade products” by the world. It is indeed a sure thing. This mobile phone really needs Malawi Sugar used to make it by hand. Previously, some netizens suspected that the design of the phone was similar to the iPhone 6, and some people complained that it lacked novelty on the outside, but what I want to say is that no matter whether the phone is still other electronic products or even all products, it is not enough to watch pictures alone. If you want to taste it, you can try it with a sufficient discussion. Escorts‘s words are still because “actualization is a unique measure to check truth”. The hand of vivo X5Pro is warm and warm, which is important from its accurate grasp and application of “arc”. Whether it is 2.5D glass, it is still the arc of the middle frame, and the arc in the direction and direction of the middle frame are done appropriately.
Before disassembly, we were doing it for vivo The high difficulty of the X5Pro once had a rating, because all ultra-thin phones have a personality: “It’s hard to disassemble, and it’s even harder to recover. “However, Koala has a foreseeable expectation, that is, this mobile phone will be less difficult to recover than the X5Max, and the consequences will be better. The reality afterwards also proved that this idea is true. In order to ensure the consequences of vision, thickness and experience, vivo The rear cover of the X5Pro uses sealing bonding, and the common one is a tight “fixed body system”. A large number of fixing screws are used on the outside of the machine. This is also an important reason why it can repair the index far higher than the X5Max. The reason why the latter is difficult to recover is that the battery deformation causes the rear cover to be unable to be tightened. The other reason is that it lacks the assumption of the “fixed body system”.
For ultra-thin mobile phones with high accuracy requirements, it is difficult for the machine body to appear loose and deformed after removal, and multiple fixes can be used to limit the recovery of the storage and smoothness. If it is possible to ensure stability, it also reduces the after-sales and maintenance repair costs. Moreover, this “fixed system” and the removable method of the rear cover are common to each other. . Since the external parts of the mobile phone cannot be fixed and sealed only by a sealed rear cover, this is not possible. The rear cover used this method is more for the sake of elegant and closedness, or perhaps for visual considerations. If you want to complete this vision, the external needs to adopt a stable fixed system. That is to say, when vivo The time when X5Pro broke the indecent design on both glass, it was destined to have the fixed form of a complete back plate + dense screw on the outside, which is also a common battle between IDdesign and constructed design.
In the process of disassembly, another thing that impressed people isThe reason why the X5Max repair index was so low in the vivo X5Pro is that the battery is tightly sticky, and it is not difficult to deform after assembly, resulting in the back of the plug. It can be imagined that for such a super-thin machine, some possible errors or deformations in the external parts can affect the overall thickness of the machine body and bring back rejuvenation. This time, the X5Pro is not so “rough” to apply a large number of packaging, and the battery is also marked with the assembly method. It can be seen that at the beginning of design, the engineer considered the issue of assembly and maintenance and repair, and even considered the user’s own hand-tuning battery replacement. Judging from the actual operation, it is indeed very loose and the battery does not show any deformation.
From the whole picture, vivo X5Pro is a mobile phone that focuses more on value and experience in holding the body. At the same time, the consequences of photography and selfie beauty are also very outstanding. Its product positioning is the public spending group who really “use” the mobile phone. In short, it is the most commonly used performance of contentment masters. They are elegant and good. Sugar is useful and fun. As for hardware configuration and installation, it is more than enough to perfunctory these things. Vivo is not purely seeking hardware heat, but pays more attention to comprehensive experience.
5. Spindle distribution: 8Malawi Sugar set of screws are used, 1 set for the top position of the back plate, gray, small number (total 1), 1 set is also used for the top position of the back plate, silver color, small number (total 2), 1 set for the top surface fixation of the back plate, black color (total 18), 1 set for the right side of the back plate, silver color (total 4), 1 set for the SIM card slot fixation, silver color (total 3), 1 set for the left side of the motherboard, silver color (total 1), 1 set for the top of the motherboard, two-purpose (Malawians EscortTotal 2 pieces), 1 set is used for headphone connection Malawi Sugar DaddyFixed port, gray, small number (1 piece in total). There are many numbers and varieties of screws, and they are distributed in different places, especially some small screws. When disassembling, remember them to avoid being confused.
The machine has undergone aging process:
1. Recovery difficulty: ★★★★, belongs to high-level standards. After seeing the entire disassembly of vivo X5Pro, there was an estimate of the difficulty of the machine. The external structure of the machine is complex, with more levels than that, and is difficult to disassemble and install in a classic way. The recovery experience has the memory and tolerance.High request.
2. Installation time: 45 minutes. MW Escorts
3. Installation step, sensory infection and points to pay attention to:
a. Compared with disassembly, the machine is much more difficult. The important thing is that it comes from two aspects. First, the external structure of the machine is complex and has used a lot of screws. It will take more time to find status and recall when installing. The second is the two small fees mentioned during the disassembly, especially the small metal parts of the headphone interface, which are very expensive to install, and require time and fatigue, which is also an important plus point for the difficulty of the installation;
b. The basic process is to reposition the motherboard barrier cover → device front and rear image head → install the motherboard back from the head → connect all the cables and radio lines → device SIM card slot → battery return fixation → repositioning the speaker unit → connect the battery discharge line, turn on the machine to stop the detection, confirm that all the performance is questionable → device back plate, put all fixing screws → repositioning back cover → reinstall back to the SIM card slot;
c. Just reply to the recovery, what is mentioned later can only be considered difficult, but no matter how disgusting it, you can do it carefully, have the urge to record it when disassembling it. However, when resuming recovery, vivo X5Pro must face a “question”, that is, the rear panel. Since it is glued with sealing, it can be said that the foundation is disposable. After dismantling once, the strength will be greatly weakened regardless of viscosity or adhesiveness. If you want to improve the resuming recovery, you must have a common glue, and there must be a certain request for skills. This is the most important contract for users to disassemble, maintain and repair, and replace parts by themselves, and it is also a major condition for resumption.
Maintenance and repair analysis:
1. Since the disassembly of vivo X5Pro is very difficult, the maintenance and repair doors are tangible, and it is difficult for ordinary people to complete the operation alone;
2. The maintenance and repair book is definitely relatively high. In addition to the value of the adjustable components, the manual cost of zero-deg maintenance and repair is not convenient.
BOE (Beijing West) releases a new black angle paper screen based on ADS Pro skills. Display skills and Mini The “golden error” of LED backlight enables the new A5F Pro series to achieve a more realistic style, such as high surrounding light, and high-level light, and colorless appearance.Clearer and more Published on 02-22 14:42 •1084 views
SAIC civilian Tuang Pro, which is equipped with the fifth generation EA888 motor, officially expressed its status On February 17, SAIC civilian Tuang Pro, which is equipped with the fifth generation EA888 motor, officially expressed its status. The Pro trilogy welcomed the third member, with new car value, advanced power, advanced intelligence, and expanded space, and effectively expounded the “seven-seater intelligent SUVs in the country” to bring users Posted on 02-18 09:53 •356 views
Apple may release Powerbeats ProMalawians Sugardaddy 2 headphone equivalent performance, and connect stability and sustainabilityMalawi Sugar Daddy in February. Compared with the AirPods series, Powerbeats Pro 2 focuses more on event functions. It is reported that the new headphones will have a more Posted on 02-05 13:43 • 615 views
What chips are used for the two VR headers? Ifixit disassembled Apple’s Vision Pro and the Meta Quest Pro, we disassembled two VR head design, lens and optical system Malawi Sugar Daddy, important chips and other aspects. ①. Visio Posted on 12-27 16:40 •1846 views
Xiaomi Electric Cooker Disassembly Tool Representative ProductsMalawi Sugar—Xiaomi’s Electric Cooker, a product with indecent sales, online value, and more expensive than the protruding product, and what about the external hardware plan. Disassembly Remove the structural parts that are “seven or eight”, there is only a little tool left to disassemble and touch the circuit, so you can be indecently Posted on 12-18 11:06 •1292 views
Decorate the 1,000 yuan HiFi-level sound into noise-cancelling blue-tooth headphones, and Bang Laipods Pro+ Reviews The demand for music and voice can also bring people extraordinary listening experience. Among the numerous TWS headphones, the key words that were recently released by Malawians Escortpods Pro+, which is included in this new machine are “high value” and “good sound” and “hook up multi-form noise reduction and noise cancellation” flag-loaded blue-tooth headphones. The hardware settings and installation of this noise cancellation headphones are not low, Posted on 11-13 10:53 •853 views
How to apply Clock Pro 1.21 Let’s calculate the storage value and export the settings and installation information? The application of this software disconnection machine has never been able to output information.
LMK04828B should Malawi Sugar use software TICS Pro to never achieve the desired input consequences. How to deal with it? 128.88Mhz4, DCLKout9 Input clock 61.44Mhz5, DCLKout12 Input clock 128.88Mhz6, DCLKout13 Input clock 3.84Mhz7, OScout Input clock (there is no fixed value here, but the input clock is required). Can you guide me how to use Malawians Sugardaddy? Posted on 11-08 07:03
Disassembly of PCB board processing files What is PCB processing request? Why do you need it? This tips blog will tear down everything you need to know about this subject. Posted on 10-14 11:10 •503 views
OrangePi 5 Pro function comprehensive test! Tomorrow we will find out the situation OrangePi5Pro. This is a brand new SBC based on RockchipRK3588SSoC released by OrangePi. RK3588S is similar to RK3588’s basic types. From the appearance, IO and port layout, see Posted on 10-08 15:58 •1029 views
The mobile phone heat dissipation will cause some heat dissipation consequences. What are some good measures to advance and disperse the consequences at this time? Let us go all the wayDisassemble a heat sink to find out the situation. This heat dissipator was purchased a year ago in a certain treasure. It uses fan + semiconductor system cooling techniques, which is as follows. The mobile phone can be applied directly and is suitable for all sizes. Published on 09-25 15:46
huaweiWATMalawians SugardaddyCH GT 5 sells for 1488, WATCH GT 5 pro sells for 2488 huawei Spring new product launch conference, huawei smart watch HUAWEI WATCH GT 5 Pro released, huaweiWATCH GT 5 sells for 1488, WATCH GT 5 pr Posted on 09-24 15:12 •2008 views
iPad Pro M4’s battery capacity has been slightly reduced, and the continued flight has reached 10 hours. According to reports, recently, the special research maintenance team iFixit has stopped deep disassembly of the new 13-inch M4 Malawians SugardaddyiPad Pro has stopped deep disassembly, and the results show that its battery capacity has decreased compared to the 2022 M2 iPad Pro, down to 38.99 Wh, cut by 4.6%. Posted on 05-20 09:59 •Malawians Escort1Malawi Sugar Daddy812 views
CapCut Pro APK’s special performance and style. Among the numerous available video editing methods, CapCut Pro APK has been exposed, providing a comprehensive set of change position editing performance. The predecessor of CapCut Pro APK CapCut is Viamaker, which was founded on 05-20 06:57
The most competitive enemy of the Pi Pi 5, OrangePi 5 Pro, has been added 4GB/8GB version. The OrangePi5Pro is called the most competitive enemy of the Pi Pi 5. One month after the release of the OrangePi5Pro (16GB) version, the OrangePi5Pro 4GB/8GB version has been released recently. Except in theTransfer Posted on 05-07 10:00 •1086 views
發佈留言